Franklin Calculator MG-6804D ユーザーズマニュアル

Recharging the Battery

Follow these instructions to recharge the battery.

1. Find the USB cable or AC adapter included with your device.

2. Make sure your device is turned off.

3. Plug the wide end of the USB cable into a USB port on your PC and the

smaller end of the USB cable into the USB port on your device.

A red light shines below the bottom right of the screen when the device is

plugged in. Continue charging your device until the battery is fully charged.

It generally takes about 4 hours to completely charge the battery. You can use

your device while it is plugged in and charging.

Note: If you are using the AC adapter, plug one end into a power source and the

USB end into the USB port on your device.

Checking Battery Power

✓

The current level of battery power is displayed in the Settings screen. Press

to turn on your device. From the main menu, press or until Settings/

Einstellungen is highlighted in the middle of the screen and then press ENTER.

Press repeatedly, until you see Battery level/Batteriestand. The more blocks you

see on the right side of the screen, the more power the battery has.

Five (5) blocks indicates the battery is fully charged.

Battery Information