Avayon DXP-1000 G2 ユーザーズマニュアル

ページ / 39
 
 WARNINGS 
 
 
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS 
LAYER TO RAIN OR MOISTURE! 
P
   
 
 
 
CAUTION 
RISK OF ELECTRIC SHOCK 
DO NOT OPEN 
 
CAUTION: 
To reduce the risk of fire and 
electric shock, do not remove the cover of 
the player. Refer servicing of the player to a 
qualified service technician only! 
 
 
This lightning flash arrow symbol in a triangle is intended to alert users to 
the presence of non-insulated high voltage within the player’s enclosure 
that may be of sufficient magnitude to constitute a risk of electric shock 
to a person. 
 
The exclamation point symbol in a triangle is intended to alert users to 
the presence of important operating and maintenance instructions in the 
literature accompanying the player. 
 
The marking of products using lasers is shown at the rear panel of the 
player and means the player has been classified as a Class 1 laser 
product utilizing laser beams that are of a weaker class. There is no 
danger of hazardous radiation outside the player. 
CLASS 1 
LASER 
PRODUCT 
 
REFER ALL SERVICING TO A QUALIFIED SERVICE TECHNICIAN ONLY! 
 
 
 
 IMPORTANT - READ THIS! 
 
…
 
Read through this instruction manual before installing and using the player.
 
…
 
Do not touch the power plug with wet hands. 
…
 
When disconnecting the power cord from the power outlet, hold the plug. Do not pull the 
power cord.  
…
 
Before moving the player, remove the disc from the player’s tray. 
…
 
Do not open the cover or touch any of the components inside the player. 
…
 
Do not install or operate the player under direct exposure to sunlight, or near objects that radiate 
heat. Doing so may lead to overheating and damage the player.  
…
 
Do not install or operate the player in overly moist or humid environments. Doing so may 
adversely affect the laser head. 
…
 
Install the player on flat surface with good air circulation. Do not cover the ventilation holes 
on the case. Doing so may cause the player to overheat and malfunction. 
…
 
Wipe the panel and case with a soft dry cloth only. Do not apply any kind of thinner, alcohol, 
or sprays, as they will damage the finish.
 
 
 
 
5