C. Crane PR-D4VW ユーザーズマニュアル

The green jack, labeled AUX IN, is used to connect an external
audio source such as an MP3 Player, CD, or recorder, so you
can listen through your Sonido Radio’s speaker. To
do this, you will need the appropriate
patch cord. Refer to page 18 for
specifications. 

, press the Step/Band

button until 

appears on the dis-

play.

2) By pressing Tuning Down, you may adjust the steps from 

200kHz for U.S. or 100kHz per step for Europe.

3) After the FM step is selected, press the Step/Band button 

again to bring up the AM step selections. The display 
will show AM and flash 10 kHz tuning steps. By pressing 
Tuning Down, you may adjust the steps from 10kHz to 9kHz 
per step for Europe.

4) Complete the setting by pressing the Step/Band button once 

again.

You can use a stereo or mono headphone (located on the left
hand side of your radio) with a 3.5mm plug. When you insert
headphones into the headphone jack, the speaker is disconnect-
ed and this radio provides FM stereo through the headphones.

If using a mono headphone jack or a single earphone 
piece, the FM sound will be in mono. A limited number of 
earpieces may not work properly. Call for advice.