Motorola Car Satellite TV System DCH3200 ユーザーズマニュアル

29

 

 

 

 

 

 

The In-Band Status fields are:  

The values displayed on the OSD are:  

64 QAM — 64 QAM digital channel 

256 QAM — 256 QAM digital channel 

Indicates whether the in-band receiver is locked to the carrier. If a digital carrier is 
not present, it indicates the carrier is not locked: 

YES L 

Carrier 

locked 

NO 

U 

Carrier not locked 

Indicates whether the in-band receiver is locked to the current program clock 
reference for a digital video service on the specified tuner. If a digital carrier is 
not present, it indicates the PCR is not locked. 

Indicates whether data is being carried on the in-band stream. The indicators 
cover all packet processors regardless of the stream they are monitoring: 

YES 

On 

In-band data detected within last 5 seconds 

NO 

Off 

In-band data not detected within last 5 seconds 

The In-band frequency is center RF carrier frequency tuned for the digital service 
on the specified tuner. The frequency is displayed in MHz in xxxx.xxx format and 
ranges from 54 to 860 MHz. 

When carrier lock has been established, displays an estimate of the carrier 
signal-to-noise ratio in dB, with an explanation: 

GOOD — Good value 

FAIR — Marginal signal level, check the signal 

POOR — Unusable signal 

INVALID — Invalid SNR value  

5 Second Error Counts  Indicates the number of correctable and uncorrectable digital multiplex errors, up 

to 9999. It is updated every 5 seconds and reset each time the DCH3200 is 
power cycled or another digital multiplex is tuned. The maximum value displayed 
is 9999, even if there were more than 9999 errors. 

IB diagnostic 
indicator

Data activity 
indicator

Carrier lock indicator 
(L = locked, U = unlocked

)