Alarm Lock Trilogy PDL3000 開発者ガイド
35
ACCESS = Entry into a restricted area.
AMBUSH = A special Code entered at the keypad when the User is
AMBUSH = A special Code entered at the keypad when the User is
forced to unlock a device. The device unlocks but sends a silent
alarm with no indication at the keypad. Can be used to trip a
relay, to alert security, or trip a silent alarm on a Burglary Control
Panel.
alarm with no indication at the keypad. Can be used to trip a
relay, to alert security, or trip a silent alarm on a Burglary Control
Panel.
AUDIT TRAIL = A date/time stamped log of previous lock events.
BURGLARY CONTROL PANEL = Provides local alarm and remote
BURGLARY CONTROL PANEL = Provides local alarm and remote
communication to request security for burglary/break-in. A
PDL3000 relay output used for Ambush can provide a silent
alarm and call-for-help.
PDL3000 relay output used for Ambush can provide a silent
alarm and call-for-help.
CLOCK
•
REAL TIME CLOCK = An accurate built-in clock that allows
date/time stamping of events. The clock can be slowed or
speeded up to fine tune long term accuracy to within three
minutes per year.
speeded up to fine tune long term accuracy to within three
minutes per year.
•
CLOCK SETTINGS = Printout includes date, time, weekday,
and clock speed.
•
CLOCK SPEED = The clock can be adjusted to allow faster/
slower speeds and therefore increasing clock accuracy.
CODE
= Numeric sequence of numbers (such as: 1234) entered at
the keypad. If Star-Enter-Key is required, must be followed by a
[
[
:] key.
•
AMBUSH CODE = See Ambush.
•
BASIC USER CODE = User Codes assigned to User Num-
bers 12+ (except Users 297-300). (Does not allow
programming)
programming)
•
INSTALLER CODE = User Codes assigned to User Numbers
2 and 3. (Allows all programming except Master functions).
•
INVALID CODE = A User Code that has not been
programmed in the lock.
•
MANAGER CODE = User Codes assigned to User Numbers 4
through 6. (Allows most of the programming functions).
•
MASTER CODE = User Code assigned to User Number 1.
Default (factory) Master Code is 123456. The User with the
Master Code has complete control of the lock.
Master Code has complete control of the lock.
•
PRINT ONLY USER CODE = User Code assigned to Users
10 and 11. (Allows no programming except print functions).
•
QUICK ENABLE USER 300 CODE = Refers to the User Code
entered by User 297 which (when entered at the keypad)
enables the User Code assigned to User 300 for one time
only.
enables the User Code assigned to User 300 for one time
only.
•
QUICK PC ACCESS CODE = Permits upload/download to
DL-Windows Software on IBM/compatible computer running
Microsoft Windows 95, 98, or NT 4.0. Refers to the User
Code for User 298.
Microsoft Windows 95, 98, or NT 4.0. Refers to the User
Code for User 298.
•
SERVICE CODE = User 300 User Code. Allows only one
entry, then needs to be re-enabled by the User 297 User
Code to regain access.
Code to regain access.
•
SUPERVISOR CODE = User Codes assigned to Users 7, 8
and 9. Can only program day-to-day operation.
•
USER CODE = Code used by Users. Code is 3 to 6 numeric
digits long, allowing controlled entry.
•
VALID CODE = An entered User Code that has been
programmed in the device.
COM PORT = A computer serial communications port used to
communicate with the Lock and/or Data Transfer Module.
DATA TRANSFER MODULE = A device that permits transfer of
program/data between a computer and the lock.
DATE = Month, Day and Year entered as MMDDYY.
DAY OF WEEK = Sunday through Saturday (where 1 = Sunday and
DAY OF WEEK = Sunday through Saturday (where 1 = Sunday and
7 = Saturday).
DEFAULT = Default settings are the original settings that were set
at the factory; in other words, it is the lock's original factory con-
dition when the lock was first taken out of its box. The default
settings are permanently encoded within the lock's fixed mem-
ory, and when the lock is first started, or when power is removed
and re-applied (see Wiring and Power-Up, page 11), the original
factory default settings are re-loaded and take effect.
dition when the lock was first taken out of its box. The default
settings are permanently encoded within the lock's fixed mem-
ory, and when the lock is first started, or when power is removed
and re-applied (see Wiring and Power-Up, page 11), the original
factory default settings are re-loaded and take effect.
DISABLE = Turn off.
DOOR NUMBER = Identification of each door with a specific
DOOR NUMBER = Identification of each door with a specific
number (1-96). (Used with AL-DTM2 Transfer Module)
DOWNLOAD = Send data to lock or AL-DTM.
ENABLE = Turn on.
EVENTS = Recorded lock activity.
FUNCTION (also called Programming Functions) = are the
ENABLE = Turn on.
EVENTS = Recorded lock activity.
FUNCTION (also called Programming Functions) = are the
numbers used to program lock features (enabling/disabling
Users, User Groups, Passage Mode, Schedules, etc.).
Users, User Groups, Passage Mode, Schedules, etc.).
GROUP
•
USER GROUP = Defining a User to specific Groups, allows
User entry when the Group is allowed entry.
•
GROUP 1 DISARMS BURGLAR CONTROL = A Group 1
USER CODE entry can disarm an alarm panel during a
predefined schedule. Should the Group 1 enter the lock
outside of the scheduled time, the alarm will not disarm. The
alarm panel must be armed through other means (such as
an Alarm Panel Keypad). The Burglary Alarm Panel must be
programmed to disarm from an Armed State Only and the
zone input must be programmed for input disarming.
predefined schedule. Should the Group 1 enter the lock
outside of the scheduled time, the alarm will not disarm. The
alarm panel must be armed through other means (such as
an Alarm Panel Keypad). The Burglary Alarm Panel must be
programmed to disarm from an Armed State Only and the
zone input must be programmed for input disarming.
•
GROUP 1 ENABLES GROUP 4 USERS = A Group 1 USER
CODE entry during a predefined schedule will allow access
to Group 4 Users.
to Group 4 Users.
•
GROUP 1 PUTS UNIT IN PASSAGE = A Group 1 USER
CODE entry during a pre-defined schedule will unlock unit.
INSTALLER = See.... CODE, INSTALLER CODE.
KEYPAD = 10-numeric keys,
KEYPAD = 10-numeric keys,
: and special ; key.
•
KEYPAD LOCKOUT = Keypad is programmed to lockout Us-
ers, for a specified period of time, when a specified number
of invalid User Codes are entered.
of invalid User Codes are entered.
•
KEYPAD PROGRAMMING = Ability to program the lock
through the keypad.
KEYPRESS = Pressing a button on the Lock’s Keypad.
LEVEL ABILITY = Predefined User Types (such as Master,
LEVEL ABILITY = Predefined User Types (such as Master,
Installer, Manager, Supervisor, and Print Only User) have
specific abilities to program and/or control the lock.
specific abilities to program and/or control the lock.
LOCKOUT ATTEMPTS = A specified number of invalid User Code
entries (1-9), that will disable the keypad for a predefined period
of time (1-60 seconds).
of time (1-60 seconds).
LOCKOUT TIME = A predefined time (1-60) seconds that the lock
will stop accepting User Codes, after a specified number of
invalid User Code entries (1-9).
invalid User Code entries (1-9).
LOG = See... AUDIT TRAIL.
MANAGER = See... CODE, MANAGER CODE.
MASTER = See... CODE, MASTER CODE.
PASSAGE = Allow anyone to pass through the door without USER
MANAGER = See... CODE, MANAGER CODE.
MASTER = See... CODE, MASTER CODE.
PASSAGE = Allow anyone to pass through the door without USER
CODES (door is unlocked).
PRINTER = A printout device such as an infrared printer or
computer printer.
Glossary