Actiontec GT704 クイック設定ガイド
Downloading and Installing the USB Driver for the GT704
1. When you begin the driver download, you are prompted to either "Run" or Save" the file,
select "Save".
2. When you choose the location where you want the file to be saved, be sure to select a
location that you are familiar with accessing, like My Documents or the Desktop. That way
when the download has finished, you can find the file(s) easily.
when the download has finished, you can find the file(s) easily.
3. The USB driver download is a Self-Extracting ZIP file, which means that to extract the files
stored in it, all you need to do is run the program. Start it like you would any application,
one method is to double-click the file.
one method is to double-click the file.
4. If you have XP you may be prompted to “Run” or “Cancel”, select “Run”. When you do, the
program will prepare to install the drivers on to your computer. You can change the default
location to any you choose, but if you leave it at the default, the program will create the
folder “USB_Drivers”, and install all of the drivers into that folder. The default behavior is
to create the folder in the same location as the program it self. So the folder will be in the
same location as the downloaded file, making it easy to find.
location to any you choose, but if you leave it at the default, the program will create the
folder “USB_Drivers”, and install all of the drivers into that folder. The default behavior is
to create the folder in the same location as the program it self. So the folder will be in the
same location as the downloaded file, making it easy to find.
5. With the GT704 powered up, you are ready to connect the USB cable. Connect one end to
the GT704 and the other to a USB port on your Windows PC.
6. When you connect the cable, the Hardware Wizard will open. If you are prompted to use
Windows Update, select “No, not this time.”, and click NEXT.
7. It is very unlikely that Windows would be able to locate the driver on its own, so you will
need to select the option that will allow you to “Specify a specific location.”, and click
NEXT if prompted.
NEXT if prompted.
8. Whether or not you needed to click NEXT, you will be prompted to choose the locations
you wish Windows to search. Deselect any Removable Media, like a floppy or CD-ROM,
and instead select the option that allows you to “Specify the location” with a “Browse”
button.
and instead select the option that allows you to “Specify the location” with a “Browse”
button.
9. Use the “Browse” button to find the “USB_Drivers” folder, and then, go inside that folder,
all the way down to the folder named for the version of Windows you are using. When you
have highlighted that folder, the “OK” or “Open” button will allow you to click it. When
you do, it will take you all the way back to the Hardware Wizard page where you initially
clicked the Browse button.
have highlighted that folder, the “OK” or “Open” button will allow you to click it. When
you do, it will take you all the way back to the Hardware Wizard page where you initially
clicked the Browse button.
10. With the location of the driver files showing in the small text box next to the Browse button,
now click NEXT.
11. When Windows has installed the driver, you will be prompted with a “Finish” button. Click
it, and you are done.