Directed Electronics Automobile Parts RSIII ユーザーズマニュアル
©
2003
Directed Electronics, Inc.
9
H1/3 WHITE/BLUE Activation Input
A momentary input on this wire will start or stop the motor, just as transmitting Channel 3 from
the transmitter/receiver does. It is often connected to an optional momentary push-button switch
to make activating Valet Take Over more convenient.
A momentary input on this wire will start or stop the motor, just as transmitting Channel 3 from
the transmitter/receiver does. It is often connected to an optional momentary push-button switch
to make activating Valet Take Over more convenient.
H1/4 BLACK/WHITE (-) 200 mA Domelight Supervision Output
Connect this wire to the optional domelight supervision relay as shown in the following diagram:
Connect this wire to the optional domelight supervision relay as shown in the following diagram:
H1/5 GREEN (-) Door Trigger Input, Zone 3 and Door Icon
Most vehicles use negative door trigger circuits. Connect the GREEN wire to a wire showing
ground when any door is opened. When connecting to newer model vehicles there is generally a
need to use individual door triggers. See DirectFax document 1076 for wiring instructions. This
wire will report Zone 3.
Most vehicles use negative door trigger circuits. Connect the GREEN wire to a wire showing
ground when any door is opened. When connecting to newer model vehicles there is generally a
need to use individual door triggers. See DirectFax document 1076 for wiring instructions. This
wire will report Zone 3.
NOTE: If using a door trigger wire that has a delay, Advanced Menu 2, feature 6, or the 998T
Bitwriter can be used to turn Bypass Notification off.
Bitwriter can be used to turn Bypass Notification off.
IMPORTANT! This output is only intended to drive a relay. It cannot be connected
directly to the domelight circuit, as the output cannot support the current draw of one
or more bulbs.
directly to the domelight circuit, as the output cannot support the current draw of one
or more bulbs.