Alloy Computer Products Network Device BWS-136 ユーザーズマニュアル

BWS-136 User Manual_amend.doc 

- 17 - 

The group of setting is to configure the serial interface and data 

packing settings.    Data Packing setting is are as follow: 

Length: Pack the length of serial data before forwarding data to 

Ethernet port 

Timeout: the period of time to forward data to Ethernet Port 

Delimiter: Wait for the Delimiter Character before forwarding 

data to Ethernet port.    The Delimiters are maximum two bytes 

Hex format ASCII code. If you use Carriage Return (CR) and Line 

Feed (LF) as delimiters, you can specify 0D0A or 0d0a. 

 

The group of TCP/IP Network settings are configuring the IP 

Address, TCP port and operation mode as follow: 

 

OpMode: TCP operation mode setting 

 

TCP Port: TCP Port number of BWS-136 

Destination IP: The IP address of remote host which BWS-136 

will actively connect to (TCP Client mode only)

Connect At: 

 means TCP connection is established when 

system starts (TCP Client mode only) 

Timeout: When this option is checked, TCP connection will be 

disconnected if there is no serial data activity before timeout 

IP Mode: Configure the IP Address to be Static IP or Dynamic IP 

by DHCP 

BWS-136 User Manual_amend.doc 

- 18 - 

IP Address: Set the Static IP Address 

Subnet Mask: Subnet Mask setting 

Gateway: Gateway address setting 

 

Click Edit Device Name button can edit the device name 

 

BWS-136 provides IP address filtering method and password 

authentication for access control