HP 160 G6 490455-421 ユーザーズマニュアル
製品コード
490455-421
Storage Controller
Non-Hot Plug and Cold
Plug SATA Models
Plug SATA Models
HP Smart Array B110i SATA RAID
NOTE: Embedded SATA controller support transfer rate up to 3Gb/s
NOTE: To enable RAID for embedded SATA controller, use EZ set-up CD to
download driver, hpahcisr.sys, is part of the 8.20 PSP, Smart Start, EZSetup
CD. For more information on SW Smart Array, go to:
NOTE: To enable RAID for embedded SATA controller, use EZ set-up CD to
download driver, hpahcisr.sys, is part of the 8.20 PSP, Smart Start, EZSetup
CD. For more information on SW Smart Array, go to:
NOTE: A diskette drive or virtual FDD using LO100 Advanced Pack is needed to
install storage controller drivers during a Windows operating system
installation from a CD.
NOTE: The addition of a Smart Array hardware based storage controller to a
Non-Hot Plug SATA Model is only supported for external storage.
NOTE: Non VMware Support for software RAID. A Smart Array controller with
hw RAID must be used to support ESX.
NOTE: To enable Hot plug functionality , use HP Smart Array Hot Plug Advance
Pack for B110i (PN TC421A)
install storage controller drivers during a Windows operating system
installation from a CD.
NOTE: The addition of a Smart Array hardware based storage controller to a
Non-Hot Plug SATA Model is only supported for external storage.
NOTE: Non VMware Support for software RAID. A Smart Array controller with
hw RAID must be used to support ESX.
NOTE: To enable Hot plug functionality , use HP Smart Array Hot Plug Advance
Pack for B110i (PN TC421A)
Hot Plug SATA/SAS Models HP Smart Array P410 Controller (RAID 0/1/1+0)
NOTE: Support transfer rate up to 6Gb/s SAS or 3Gb/s SATAHP Smart Array
P410 Controller 256 BBWC (RAID/0/1/1+0/5/5+0)
NOTE: Support transfer rate up to 6Gb/s SAS or 3Gb/s SATA
P410 Controller 256 BBWC (RAID/0/1/1+0/5/5+0)
NOTE: Support transfer rate up to 6Gb/s SAS or 3Gb/s SATA
NOTE: Available upgrades: P410 with FBWC, 256MB with BBWC, 512MB with FBWC, Battery kit upgrade (for
the 256MB cache), and Smart Array Advanced Pack (SAAP).
NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced Pack License Key upgrade (P/N:
516471-B21) is required to enable RAID 6, 6+0
NOTE: To achieve highest possible stated transfer rate please make sure the firmware on the drive bays
(backplanes) and HP Smart Array controller up to date. Latest firmware is available to download from HP
support web site.
NOTE: HP Smart Array B110i does not support greater than 2TB hard drive.
the 256MB cache), and Smart Array Advanced Pack (SAAP).
NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced Pack License Key upgrade (P/N:
516471-B21) is required to enable RAID 6, 6+0
NOTE: To achieve highest possible stated transfer rate please make sure the firmware on the drive bays
(backplanes) and HP Smart Array controller up to date. Latest firmware is available to download from HP
support web site.
NOTE: HP Smart Array B110i does not support greater than 2TB hard drive.
Internal Storage Devices Diskette Drives
Via USB only
Optical Drives
Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
Drive Bays
One of the following
depending on Model
depending on Model
Up to 4 Non-hot plug SATA 3.5" drives
Up to 4 Hot plug SAS/SATA 3.5" drives
Up to 8 Hot plug SAS/SATA 2.5" drives
Maximum Internal
Storage
Storage
One of the following
depending on Model
depending on Model
Non-Hot Plug LFF SATA
12.0TB
4 x 3TB
Hot Plug LFF SATA
12.0TB
4 x 3TB
Hot Plug LFF SATA SSD
1.6TB
4 x 400GB
Hot Plug LFF SAS
12.0TB
4 x 3TB
Hot Plug SFF SATA
8.0TB
8 x 1TB
Hot Plug SFF SATA SSD
3.2TB
8 x 400GB
Hot Plug SFF SAS
8.0TB
8 x 1TB
Hot Plug SAS SSD
6.4TB
8 x 800GB
QuickSpecs
HP ProLiant DL160 Generation 6 (G6)
Standard Features
DA - 13247 Worldwide — Version 59 — September 24, 2012
Page 4