Motorola Automobile Accessories F5218 ユーザーズマニュアル

When installing the CPU Box, a Mounting Trunnion (see Figure 23) should always be used 

unless an alternate method or other mounting option is specifically certified by Motorola 

Solutions.
The CPU Box can be mounted at any place in the passenger compartment that provides 

adequate ventilation (see Figure 5).
It is recommended that the CPU Box be mounted in a place where the removable HDD/SSD 

enclosure, Express Card & SIMs Compartment can be easily accessed. Attach the adhesive 

tape, provided in the shipping carton, to the Express Card to enable easy removal of the 

Express Card from the Express Card & SIMs Compartment.
Suggested locations for CPU Box installation, in order of preference, are: on the trunk tray, 

on the front of the prisoner cage, under the dashboard, inside the console, or under the seat 

(not in the direct path of the vehicle heater air flow). 
The CPU Box Mounting Trunnion is attached to the CPU Box by four bolts supplied with the 

Mounting Trunnion. The Mounting Trunnion can be affixed to a flat surface by eight bolts 

(not included).

1. Never try to remove the HDD/SSD unit before shutting 

down the workstation and switching off the On/Off power 

switch on the backpanel of the CPU Box. Doing so can 

result in loss of data, and can damage the workstation and 

the sensitive circuitry of the HDD.

2. Make regular backups of data from your HDD to an 

external flash disk or other storage media.

3. Once the HDD/SSD Unit is removed from the HDD/SSD 

Unit Compartment, the CPU Box is not sealed. In such 

condition, do not expose the CPU Box or HDD/SSD Unit 

to sand, dust, liquid or extreme humidity.