Miranda Camera Co Universal Signal Processor JAZZ-800 ユーザーズマニュアル

18  |  JAZZ-800 

 
This section describes the control panel for the JAZZ-800 Universal Video Processor. The panel can operate 
in one of two modes, local or remote.  

 
Local Control (Full) 

In the Local Control mode, the panel is physically mounted to the JAZZ-800 frame and controls this one unit. 
The panel establishes communication with the frame and is powered via a multi-pin header connector 
located between the two units.  

 
Remote Control (Full) 

In the Remote Control mode, the panel is mounted apart from the chassis. It is connected to the chassis via 
an Ethernet connection and powered by an external power supply. The Remote panel can be assigned to 
any JAZZ-800 chassis on the network. Refer to page xx in this manual for details on connecting a Remote 
panel to a JAZZ-800 chassis. 

 

Control Panel Layout 
The control panel is divided into 10 Sections. 

•  Section 1 – Input / Output channel selection 

•  Section 2 – Video source selection 

•  Section 3 – Format (video line & frame-rate) selection 

•  Section 4 – Aspect Ratio selection 

•  Section 5 – Audio source selection 

•  Section 6 – Display, rotary encoder, USB port 

•  Section 7 – Proc Amp 

•  Section 8 – Logo, Channel ID  

•  Section 9 – Audio and System status LEDS 

•  Section 10 – Remote, Tally, Power Switch 

 

•  “Soft” buttons associated with panel functions such as input select, video select, etc. 

 

Display buttons (Qty 10) 
“Soft” buttons associated with the LCD display.  

•  8 buttons for use with display 

•  1 button for the Menu ”Home” function 

•  1 button for the Menu ”Back” function 

 

•  The rotary encoder is a linear encoder with push function. 

 

•  A power switch is located at the right-hand end of the control panel 

•  The power switch controls power for the control panel and the JAZZ-800 chassis by inhibiting the 

power supplies of the JAZZ-800. 

 

LEDs 
The JAZZ-800 Control Panel incorporates the following: 

•  Tri-Color LED’s (Qty 31) 

o

  The LED’s are red, green, blue tri-color LED’s 

o

  All LED’s in Section 1 to 5 are tri-color