Moeller Marine XControl PLC System AWB2700-1428GB ユーザーズマニュアル
Creating an Example Project
12/01 AWB2700-1428GB
26
X
Select the Input/Output tab to configure the inputs and outputs.
X
Select the required input/output modules from the left-hand
column and transfer them to the right column using the Select
button.
column and transfer them to the right column using the Select
button.
The order of the modules in the right-hand column must match the
configuration of the controller.
configuration of the controller.
The module list shows the type designations of the XI/ON elec-
tronic modules irrespective of the base module used. There is only
one difference in the way the modules are displayed: modules that
are type-dependent have the designation T (e.g.: T-XN-2DI-
24VDC-P), modules that have a standard format have the designa-
tion S (e.g. S-XN-4DI-24VDC-P). The modules used in the example
are type-dependent.
tronic modules irrespective of the base module used. There is only
one difference in the way the modules are displayed: modules that
are type-dependent have the designation T (e.g.: T-XN-2DI-
24VDC-P), modules that have a standard format have the designa-
tion S (e.g. S-XN-4DI-24VDC-P). The modules used in the example
are type-dependent.
X
Click the + sign of the selected module in the left pane in order
to find the physical addresses of the inputs/outputs.
to find the physical addresses of the inputs/outputs.
The addresses are shown as directly represented variables that you
can use directly in the declaration.
can use directly in the declaration.
X
Save the configuration under a name e.g. ABC.
Figure 46:
Configuring the inputs/outputs
Figure 47:
Detailed display of the elements