Mitsubishi Electronics EXTRON 4XIXIXIXIXI ユーザーズマニュアル

6. Plug the 15-pin HD connector of the Projector Communications Extension cable

(shown as CC 50') into the PJ Comm port on the System 4

.

______ Secure the screws on all D connectors.

7. Plug the (4 or 5) BNC connectors from one end of the (user-supplied) RGBS/HV

cable onto the System 4

 output. Connect the 15-pin connector on the other end

of the RGBS/HV cable to the PC-1 Input connector on the Mitsubishi LVP-X200
connector panel.

Use the following illustration as a guide when connecting the System 4

 to a

Mitsubishi LVP-X200 projector. Refer to Mitsubishi documentation to continue
the installation.

____________ In a rack mount, do NOT allow the weight of the cables to be supported by the

System 4

. See page 2-5 for cabling guidelines.

__________ System 4

 channel numbers correspond to the projector’s “Group” numbers.

RGBHV  5 BNC

15-Pin

Male

9-Pin Female

SY-VGA

26-173-01

ComAdapter

26-475-01  "G"

15-Pin Male