Multiquip Home Theater Server V304 ユーザーズマニュアル

1. Remove the gasoline cap located on top of fuel tank.

2. Handle Fuel in a safety container. If the container does not

have a spout use a funnel.

3. Visually inspect to see if  fuel level is low.  If fuel is low,

replenish with unleaded fuel. When refueling, be sure to use
a strainer for filtration. DO NOT top-off fuel. Wipe up any
spilled fuel.

4. Pay attention to the fuel tank capacity when replenishing

fuel. Refer to the fuel tank capacity listed on page 11,
Engine Specification Table 1.

1. Fill the water tank (Figure 13)  with clean  water, and verify

that valve for the water tank is 

closed.

1. Visually inspect the hydraulic fluid in the hydraulic reservoir

(Figure 14).   If the hydraulic fluid is low,  fill the reservoir  with
Mobil 300, GM Dextron B or Ford MZC-41A type hydraulic
transmission fluid to the correct level. The correct hydraulic
fluid level will be indicated on the reservoir.