Brother MFC9130CW ユーザーズマニュアル
Chapter 7
50
Before you choose the ring pattern to
register
register
7
You can only register one Distinctive Ring
pattern with the machine. Some ring patterns
cannot be registered. The ring patterns below
are supported by your Brother machine.
Register the one your telephone company
gives you.
pattern with the machine. Some ring patterns
cannot be registered. The ring patterns below
are supported by your Brother machine.
Register the one your telephone company
gives you.
NOTE
• Ring Pattern #1 is often called Short-Short
and is the most commonly used.
• If the ring pattern you received is not on
this chart, call your telephone company
and ask for one that is shown.
and ask for one that is shown.
The machine will only answer calls to its
registered number.
registered number.
The first two rings are silent on the
machine. This is because the fax must
<<listen>> to the ring pattern (to compare
it to the pattern that was ‘registered’).
(Other telephones on the same line will
ring.)
machine. This is because the fax must
<<listen>> to the ring pattern (to compare
it to the pattern that was ‘registered’).
(Other telephones on the same line will
ring.)
If you program the machine correctly, it
will recognize the registered ring pattern of
the ‘fax number’ within 2 ring patterns and
then answer with a fax tone. When the
‘voice number’ is called, the machine will
not answer.
will recognize the registered ring pattern of
the ‘fax number’ within 2 ring patterns and
then answer with a fax tone. When the
‘voice number’ is called, the machine will
not answer.
Registering the Distinctive Ring
pattern Very important!
pattern Very important!
7
After you set the Distinctive Ring feature to
On
, your Distinctive Ring number will receive
faxes automatically. The receive mode is
automatically set to
automatically set to
Manual
and you cannot
change it to another receive mode while
Distinctive Ring is set to
Distinctive Ring is set to
On
. This ensures the
Brother machine will only answer the
Distinctive Ring number and not interfere
when your main telephone number is called.
Distinctive Ring number and not interfere
when your main telephone number is called.
When Distinctive Ring is on, the Touchscreen
will show
will show
D/R
as the Receive Mode.
a
Press .
b
Press
All Settings
.
c
Swipe up or down, or press a or b to
display
display
Fax
.
d
Press
Fax
.
e
Swipe up or down, or press a or b to
display
display
Miscellaneous
.
f
Press
Miscellaneous
.
g
Press
Distinctive
.
h
Do one of the following:
If you have not registered the
Distinctive Ring, press
Distinctive Ring, press
Distinctive
, and then press
On
.
Go to step i.
i
Press
Ring Pattern
.
j
Press the stored ring pattern you want.
Press
Press
OK
.
(You will hear each pattern as you press
the four buttons. Make sure you choose
the pattern that the telephone company
gave you.)
the four buttons. Make sure you choose
the pattern that the telephone company
gave you.)
k
Press .
Distinctive Ring is now set to
On
.
Ring
Pattern
Pattern
Rings
1
short-short or long-
long
long
2
short-long-short
3
short-short-long
4
very long
(normal pattern)
(normal pattern)