BENDIX BW2820 ユーザーズマニュアル

The SmarTire

™

 by Bendix CVS LF tool is powered by a standard 9-Volt battery. To install the 

battery, open the battery access panel on the back of the tool and connect the supplied battery to 
the 9-Volt battery connector.  Insert the battery into the slot and close the battery access panel. 
Press and hold the ON/OFF button for 2 seconds to power up the tool.  
 
 
4. 

The SmarTire

™

 LF tool is very easy to use. Simply hold it approximately 2 inches (5 cm) away from 

the tire’s surface positioned at the center of the tire’s sidewall at the location of the valve stem 
(SmarTire

™

 sensors should be installed at the valve and their location should also be indicated by a 

rim mounted label). Press and release the initiate/learn button (a single beep will be heard) and 
hold the tool in place for 5 seconds until 4 quick beeps are heard to ensure the wireless signals 
emitted from the tool reached the sensor.  
 
 

 

 

 

 

5