BMW 2005 330Ci Coupe オーナーマニュアル

160

14. Wheels with full wheel covers

place the wheel cover with the
valve opening over the valve. Use
both hands to press the cover
securely onto the rim

15. Check and correct the tire inflation

pressure at the earliest opportunity.
Vehicles with Flat Tire Monitor:
After mounting the spare tire or
correcting the tire inflation pres-
sure, reinitialize the system, refer to
page

Protect valve stems and valves from dirt
using screw-on valve stem caps. Dirty
valve stems frequently lead to slow
pressure loss.

Do not place the full wheel cover
on the space-saver spare tire,

since this could damage the cover.

The vehicle jack is designed for
changing wheels only. Do not

attempt to raise another vehicle model
with it or to raise any other type of load.
To do so could cause accidents and
personal injury.
To ensure continued safety, have the
tightness of the torque bolts checked
with a calibrated lug wrench – torque
specification: 88.5 lb ft/120 Nm – at the
earliest opportunity.

When storing a wheel in the spare tire
recess, take care to avoid bending the
threaded rod.

If light-alloy wheels other than original
BMW light-alloy wheels have been
mounted, it may be necessary to use
different lug bolts for those wheels.

Replace the defective tire as soon as
possible and have the new wheel/tire
balanced.

Driving with the space-saver
spare tire

Drive cautiously. Do not exceed a
speed of 45 mph / 80 km/h.

Be aware that vehicle handling may be
altered. Anticipate, e.g., reduced track-
ing during braking, longer braking dis-
tances and changed steering charac-

teristics when approaching limit
conditions. These handling characteris-
tics will be even more pronounced if
winter tires are mounted.

Only one space-saver spare tire
may be mounted at one time.

Mount a wheel and tire of the original
size at the earliest possible opportu-
nity.

Changing a wheel