Brocade Communications Systems Brocade Network OS 2.1 ユーザーズマニュアル

show lldp neighbors

2

show lldp neighbors 

Displays LLDP information for all neighboring devices on the specified interface.

Synopsis

show lldp neighbors [interface {tengigabitethernet rbridge-id/slot/port | gigabitethernet 
rbridge-id/slot/port} detail]

Operands

interface

Use this keyword to specify an Ethernet interface using the following 
operands:

tengigabitethernet Specifies a valid 10 Gbps Ethernet interface.

Specifies a switch by its RBridge identifier.

Specifies a valid slot number.

Specifies a valid port number.

gigabitethernet Specifies a valid 1 Gbps Ethernet interface.

Specifies a switch by its RBridge identifier.

Specifies a valid slot number.

Specifies a valid port number.

detail

Displays all the LLDP neighbor information in detail for the specified 
interface.

Defaults

None

Command

Modes

Privileged EXEC mode

Description

Use this command to display LLDP information for all neighboring devices on the specified 
interface.

If you do not use the interface operand, only the mandatory TLVs are displayed.

Usage

Guidelines

The gigabitethernet rbridge-id/slot/port operand is used only on the Brocade VDX 6710.

Examples

To display detailed LLDP neighbor information on a specific interface:

switch# show lldp neighbors interface tengigabitethernet 3/0/8 detail 

Neighbors for Interface Te 3/0/8

MANDATORY TLVs

===============

Local Interface: Te 0/8    Remote Interface: Te 3/0/8 (IF Name)

Dead Interval: 120 secs  Remaining Life : 100 secs Tx: 536  Rx: 535

Chassis ID: 0005.1e76.1020 (MAC)

Remote Mac: 0005.1e76.102c

OPTIONAL TLVs

==============

Port Interface Description: Te 3/0/8

System Name: sw0