Boxlight CD 40m CD-40m ユーザーズマニュアル
5
SETTING UP THE PROJECTOR
1
Place the projector on a flat surface.
•
The projector must be within 10 feet (3 m) of your power
source and within 6 feet (1.8 m) of your computer.
source and within 6 feet (1.8 m) of your computer.
•
If you want to project from behind a translucent screen, set
up the projector behind your screen. See “Rear Projection”
on page 24 to reverse the image.
up the projector behind your screen. See “Rear Projection”
on page 24 to reverse the image.
2
Position the projector the desired distance from the screen.
•
The distance from the lens of the projector to the screen
determines the size of the projected image. Figure 3 shows
three projected image sizes. For more information about
image size, see “Projected Image Size” on page 47.
determines the size of the projected image. Figure 3 shows
three projected image sizes. For more information about
image size, see “Projected Image Size” on page 47.
3
Make sure the projector and your computer are turned off.
F
IGURE
3
Projected image size
4.3
ft.
(1
.3m
)
21
.3 f
t. (
6.6
m
)
8.5
ft.
(2
.6m
)
5 ft
. (1.5m)
10 ft.
25 ft. (7.7m)
(3.1m)