Boxlight CD 40m CD-40m ユーザーズマニュアル

 

When Video standard is set to Auto, the projector attempts to 
pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, 
or SECAM) automatically based on the input signal it receives. 
(The video standard options may vary depending on your region 
of the world.) The input signals for SECAM, PAL-M, and PAL-N 
video cannot be automatically detected, therefore they must be 
chosen manually. If the projector is unable to detect the correct 
standard, the colors might not look right or the image might 
appear “torn.” If this happens, manually select a standard by 
clicking either mouse button and cycling through the standards.

This option lets you select how long the lamp stays on and the 
blank screen is displayed when the projector enters standby 
mode before the projector turns off. Select among 1, 5, 10, and 15 
minutes and 1 and 2 hours by clicking either mouse button and 
cycling through the options.

When you turn 

on, the projector turns the 

image upside down for ceiling-mounted projection. Highlight 
Ceiling Projection, then click either mouse button to turn this fea-
ture on and off.