Western Digital My Cloud Mirror ユーザーズマニュアル

ページ / 166
PRODUCT OVERVIEW
 9 
WD MY CLOUD MIRROR PERSONAL CLOUD STORAGE 
 
USER MANUAL
Back Panel Ethernet (Network) LEDs 
The following table describes the network and activity LEDs: 
Note:  Looking at the Ethernet port, the LED on the top right is the Activity LED, 
and the one on the bottom right is the Link LED.
Pre-installation Instructions
Before beginning installation, select a suitable location for your device to obtain maximum 
efficiency. Place it in a location that is:
Near a grounded power outlet
Clean and dust free
On a stable surface free from vibration
Well ventilated, with nothing blocking or covering the slots and openings on the top 
and bottom of the device, and in fields from electrical devices such as air 
conditioners, radio and television receivers.
Handling Precautions
WD products are precision instruments and must be handled with care during unpacking 
and installation. Rough handling, shock, or vibration can damage the device drives. Observe 
the following precautions when unpacking and installing your external storage product:
Do not drop or jolt the device.
Do not move the device while it is powered on.
Do not use this product as a portable device.
Do not remove both data drives at the same time. This will cause your device to 
become unresponsive.
State
LED
Appearance
State Description
Link down
Link
Off
Cable or device is not plugged in, or other 
end of link is not operational.
Link up – 100 Mb 
connection
Link
Yellow
Cable is plugged in, and both ends of the 
link have successfully established 
communications. 100 Mb network 
connection.
Link up – 1000 Mb 
connection
Link
Green
Cable is plugged in, and both ends of the 
link have successfully established 
communications. 1000 network 
connection.
Link idle
Activity 
Solid
Active communication is not in progress.
Link busy
Activity
Green - Blinks
Active communication is in progress.