Western Digital My Cloud Mirror ユーザーズマニュアル

Replacing a Drive

 134 

WD MY CLOUD MIRROR PERSONAL CLOUD STORAGE 

 

USER MANUAL

Inserting a Drive

Preparing a Drive

For WD replacement drives, reuse the screws and tabs attached to the faulty drive.

A standard phillips-head screwdriver is all you need.

1.   Using the parts from the faulty drive, attach a plastic tab to the top hole in the drive’s side 

(on the right if the green board is facing you). 

2.   Attach a screw to the corresponding hole on the other side of the drive.

3.   Attach label 1 or 2 to the top of the drive. Label 1 is on the left and label 2 is on the right, 

when looking down on the top of the unit. There are corresponding numbers on the 
cross brace label.

Inserting One or Both Drives

To avoid electrostatic discharge (ESD) problems, ground yourself by 

touching metal before handling the device.