Micro Technic Micronix PV-1648 ユーザーズマニュアル
Users Manual & Installation Guide
PV-
SERIES
:
16
D
IGITAL INPUTS
,
48
D
IGITAL OUTPUTS
Page 2 of 8
D
ESCRIPTION
Micronix PV-1648 lets you handle combined I/O from one single PC/104 board. The PV-1648
module plugs into any standard PC/- 104 bus interface and provides you with 16 digital opto-isolated
inputs and 48 NPN non-isolated open collector digital outputs (optional pull-up to +5V). Non-Stack-
through or stack-through (S-versions) connectors are available. Supplied with drivers for Windows
95/98 and NT.
F
EATURES AND SPECIFICATIONS
Inputs
•
Number of channels: 16 opto-isolated inputs, groups of two
•
Isolation:
Up to 1000 Vrms
•
Mix voltage range:
±30V
•
Current Limit Resistor: 10K
Ω
, 0.25W
•
Logic “1”
Uin < -10V, Uin > +10V
•
Logic “0”
-5V < Uin < +5V
•
Input delay:
ON: < 25 us
OFF: <100 us
•
Interrupts:
Int. 5,9,10,11,15 selectable on channel 0
•
Connector:
26-pin ribbon cable connector
•
Power requirement: +5V DC, 50mA
Outputs
•
Number of channels: 48 non-isolated o.c. (optional pull-up), one common GND, 4 groups of 12 bits
•
Voltage, load:
50V DC
•
Max current, load
400mA / BYTE
•
Max load per channel: 100mA
•
Saturation:
Max. 1.6V
•
Connector:
4 x 16-pin ribbon cable connector
Physical / Environment
•
Dimension:
95x90x18mm
•
Temperature range: Operating: 0°C to 60°C at 1.5A
Storage:
-40°C to +85°C
•
Humidity:
0 to 90% RH, non-condensing
•
PC/104 Stack-through connectors (S-versions)
•
Optional cable for inputs: 26-pin header to DSUB-25F, 30cm
•
Optional cables for outputs: 16-pin header to DSUB-15F, 30 cm