Linksys X3500 オーナーマニュアル

Advanced Configuration

Linksys X-Series

This  option  features  WEP  used  in  coordination  with  a  RADIUS  server .  (This 

should only be used when a RADIUS server is connected to the router .) 

If you select RADIUS as your Security Mode, each device in your 

wireless network MUST use RADIUS and the same encryption and 

shared key .

Enter the IP address of the RADIUS server .

 Enter the port number of the RADIUS server . The default is 1812 .

Enter the key shared between the router and the server .

Select  a  level  of  WEP  encryption,  (40/64-bit  10  hex  digits)  or 

104/128-bit (26 hex digits) . The default is 40/64-bit (10 hex digits) .

Enter a passphrase to automatically generate the WEP key . Then 

click Generate .

If you did not enter a passphrase, enter the WEP key manually .

If you choose to disable wireless security, you will be informed that wireless 

security is disabled when you first attempt to access the Internet . You will given 

the option to enable wireless security, or confirm that you understand the risks 

but still wish to proceed without wireless security .

When wireless security is disabled, anyone can access your wireless 

network at any time .

Three  methods  of Wi-Fi  Protected  Setup  are  available .  Use  the  method  that 

applies to the client device you are configuring .