BMW 2007 M6 Coupe オーナーマニュアル
Under t
h
e
ho
od
204
After starting the engine, the last determined
value is displayed.
The oil level must be between the two marks.
value is displayed.
The oil level must be between the two marks.
Manual transmission: the fluid level will be
shown in the lower display.
shown in the lower display.
<
Exact measurement
The oil level is measured continuously while
driving or when stopped with the engine run-
ning.
The determination of a new value can take
30 minutes or longer.
driving or when stopped with the engine run-
ning.
The determination of a new value can take
30 minutes or longer.
If only dashes are shown in the display,
it was not possible to determine a new
it was not possible to determine a new
value. This can, for example, be the case when
driving short distances or with a sporty driving
style.
driving short distances or with a sporty driving
style.
<
Fast measurement
In addition to the continuous measurement, you
can also quickly determine the current oil level,
e.g. after adding engine oil, however with a low
measuring accuracy.
can also quickly determine the current oil level,
e.g. after adding engine oil, however with a low
measuring accuracy.
1.
With the engine at operating temperature,
i.e. after at least 6 miles/10 km of uninter-
rupted driving, park the vehicle in a horizon-
tal position.
i.e. after at least 6 miles/10 km of uninter-
rupted driving, park the vehicle in a horizon-
tal position.
2.
Allow the engine to run at idle.
3.
Press the BC button in the turn signal lever
repeatedly until the oil level display is
shown in the instrument cluster.
repeatedly until the oil level display is
shown in the instrument cluster.
4.
Press the BC button in the turn signal lever
for at least 2 seconds.
The oil level is determined. A clock symbol
is displayed during the measurement.
for at least 2 seconds.
The oil level is determined. A clock symbol
is displayed during the measurement.
5.
After approx. 1 minute the current oil level is
displayed.
displayed.
If not all measuring conditions are met,
e.g. with the engine cold, "-.-" is dis-
e.g. with the engine cold, "-.-" is dis-
played. The requested measurement is carried
out as soon as possible.
out as soon as possible.
<
Possible displays
1 Oil level OK
2 Oil level at minimum:
2 Oil level at minimum:
Add a maximum of 1 US quart/1 liter of
engine oil at the next opportunity, refer to
Adding engine oil below
engine oil at the next opportunity, refer to
Adding engine oil below
3 Oil level is too high
Have the vehicle checked immedi-
ately; otherwise, engine damage may
ately; otherwise, engine damage may
result if too much oil has been added.
<
4 Oil level at maximum
5 Fast measurement running: oil level is being
5 Fast measurement running: oil level is being
determined
6 No value can be determined at this time
Adding engine oil
Do not add oil until a value slightly above the
minimum of 0.0 US quarts/liters is displayed by
the oil level measurement. In this area a mes-
sage is also shown on the Control Display.
minimum of 0.0 US quarts/liters is displayed by
the oil level measurement. In this area a mes-
sage is also shown on the Control Display.
Add oil within the next 125 miles/200 km,
otherwise the engine could be damaged.
otherwise the engine could be damaged.
Add a maximum of 1 US quart/1 liter of oil, oth-
erwise the engine may be damaged by adding
too much oil.
erwise the engine may be damaged by adding
too much oil.
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG