BMW 2009 328i Coupe オーナーマニュアル

ページ / 260
Replacing components
222
4.
Apply gentle pressure to the bulb while 
turning it to the left for removal and replace-
ment.
5.
Attach the bulb holder.
6.
Reattach the trim of the luggage compart-
ment lid and the holder for the warning tri-
angle.
License plate lamp, center brake lamp, 
parking/tail lamp
These lamps use LED technology for operation. 
In the event of a malfunction, please contact 
your BMW center or a workshop that works 
according to BMW repair procedures with cor-
respondingly trained personnel.
Changing wheels
Your BMW is equipped with Run-Flat Tires as 
standard. This removes the need to change a 
wheel immediately in the event of a puncture.
For information on continuing to drive with a 
damaged tire, refer to Indication of a flat tire on 
page
.
The symbol identifying Run-Flat Tires is a circle 
with the letters RSC on the sidewall, refer to 
Run-Flat Tires, page
When mounting new tires or changing over 
from summer to winter tires and vice versa, 
mount Run-Flat Tires for your own safety. In the 
event of a flat, no spare wheel is available. Your 
BMW center will be glad to advise you. Refer 
also to New wheels and tires, page
.
The tools for changing wheels are avail-
able as optional accessories from your 
BMW center.
<
Jack mounting points
The jacking points are at the positions shown in 
the illustration.
Vehicle battery
Battery care
The battery is 100% maintenance-free, the 
electrolyte will last for the life of the battery 
when the vehicle is operated in a temperate cli-
mate. Your BMW center will be glad to advise in 
all matters concerning the battery.
Charging the battery
Only charge the battery in the vehicle via the 
terminals in the engine compartment with the 
engine off. Connections, refer to Jump starting 
on page
.
Disposal
Have old batteries disposed of by your 
BMW center or hand them in to a recy-
cling center. Maintain the battery in an upright 
position for transport and storage. Always 
secure the battery against tipping over during 
transport.
<
Power failure
After a temporary power loss, the functioning of 
some equipment may be limited and require 
reinitialization. Individual settings may likewise 
have been lost and will have to be programmed:
>
Time and date 
These values must be updated, refer to 
page
.
Online Edition for Part no. 01 41 2 600 967  - © 09/08 BMW AG