BMW 2008 750i Sedan オーナーマニュアル

Driving

Automatic transmission with

Steptronic

In addition to fully automatic operation, you can
also shift manually using the buttons on the
steering wheel, refer to page

Transmission range selection

P R N D

Displays on Info Display

P R N D S or M1 to M6
The transmission range is indicated, and in the
manual mode, the gear currently engaged.

Selecting transmission range

Only engage transmission positions D, R,
or N when the engine is running: interlock.

With the vehicle stationary, depress the
brake pedal before shifting out of P or N;
otherwise, the shift command will not be
executed: shiftlock.

To prevent the vehicle from creeping
after you select a driving position,

maintain pressure on the brake pedal until
you are ready to start off. Activate Auto-
matic Hold to suppress the tendency to
creep, refer to page

The engaged position is indicated on the Info
Display.

Selecting D, R or N

Lightly pull selector lever and engage desired
position:

N Neutral:
To resistance point, arrows

D Drive:
Downward past resistance point, arrow

R Reverse:
Upward past resistance point, arrow

The selector lever immediately returns to the
center position when released.

Selecting P

Press button

P Park

Select only when the vehicle is stationary. The
rear wheels are locked.

Transmission automatically shifts into P
as soon as you switch off the engine

unless N is selected and the remote control is in
the ignition lock, refer to page