BMW 2007 530xi Sedan オーナーマニュアル

ページ / 286
 125
wise the payload or the roll-up cover may be 
damaged.
<
Expanding cargo bay
The rear backrest is divided. You can fold down 
both sides separately in order to expand the 
cargo bay.
Reach into the recess and pull toward the front.
When you fold back the backrest, be sure 
that the catch engages securely. The red 
warning indicator disappears in the recess 
when the catch is engaged. If it is not properly 
engaged, transported cargo could enter the 
passenger compartment during braking or eva-
sive maneuvers and endanger the vehicle occu-
pants.
<
To ensure that the safety systems con-
tinue to provide optimized protection, 
please observe the safety belt information on 
page
<
Separation net
Do not allow the separation net to snap 
back, otherwise there is a risk of injury 
and the separation net may be damaged.
<
With normal cargo bay
Pull the separation net out of the case by the 
loop. Grasp the rod on both sides and insert it in 
the brackets, arrow
1. This is best carried out 
from the rear seat.
When you no longer require the separation net, 
grasp the rod on both sides and remove it from 
the brackets, arrow
2. Then slowly allow the 
separation net to glide into the case.
With an expanded cargo bay
1.
Fold down both rear backrests, refer to 
Expanding cargo bay.
2.
Unlock the case on both sides with the but-
tons, arrow
1.
3.
Pull out the case downward, arrow
2; avoid 
tilting when doing so.
4.
Push the case into the guides on the back of 
the seat backrests.
5.
Carefully pull out the separation net and 
insert it in the front brackets as described in 
With normal cargo bay. This is best carried 
out from the front seat.
To restore the original state, proceed in the 
reverse order. Finally, lay the case in the two 
side brackets and then press forward until it 
engages. The red warning indicator disappears 
Online Edition for Part no. 01 41 0 013 308 02/07 BMW AG