BMW 2005 330xi Sedan オーナーマニュアル

188

journey with great care, provided that local leg-
islation does not prohibit this.

Have work on the xenon lighting system 
performed only by your BMW center or a 

workshop that works according to BMW repair 
procedures with correspondingly trained per-
sonnel. Due to the high electrical voltages 
present, there is a risk of potentially fatal acci-
dents if work is performed inappropriate.

<

In the event of a malfunction, please contact 
your BMW center or a workshop that works 
according to BMW repair procedures with cor-
respondingly trained personnel.

H7 bulb, 55 watts

Always wear gloves and eye protection; 
the atmosphere within the H7 bulb is 

pressurized. Otherwise there is a risk of injury if 
the bulb is damaged.

<

There are separate headlamp covers for low-
beam headlamps and high-beam headlamps.

Be careful when installing the covers, as 
otherwise leaks could occur and cause 

damage to the headlamp system.

<

For checking and adjusting headlamp 
aim, please contact your BMW center.

<

The high-beam headlamp can be accessed 
from the engine compartment, whereas the 
low-beam headlamp is accessed through a flap 
in the wheel well.

1 Cover for high-beam headlamp
2 Cover for low-beam headlamp
3 Turn signal
To remove the covers:

1.

Fold the respective wire bracket to the side, 
see arrows.

2.

Flip open the cover and take it out of the 
guide.

Follow the same steps in reverse order to reat-
tach the covers.

Only for low-beam headlamps and turn signals:

1.

Turn the wheel inwards.

2.

Open the flap in the wheel well.

1.

Remove the relevant cover for the head-
lamp.

2.

Disconnect the plug from the lamp.

Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG