BMW 2005 330xi Sedan オーナーマニュアル

ページ / 223
Controlling the climate for pleasant driving
90
Automatic climate control
Comfortable interior climate
AUTO program
7 offers the ideal air distribution 
and air flow rate for practically all conditions, 
refer to AUTO program below. All you need to 
do is select an interior temperature which is 
comfortable for you.
The following sections inform you in detail 
about how to adjust the settings.
Most settings are stored for the remote control 
currently in use, refer also to Personal Profile 
settings on page
Adjusting air distribution manually
Direct the flow of air to the win-
dows, to the upper body area or to 
the footwell.
You can switch the automatic air 
distribution back on by pressing the AUTO but-
ton.
Manual fine adjustments in air 
distribution
You can set the rate of incoming airflow for 
manual air distribution.
iDrive concept, refer to page
.
1.
Press the 
 button.
This opens the start menu.
2.
Move the controller to the left to call up "Cli-
mate".
3.
Select "Vent settings" and press the con-
troller.
4.
Select the desired area.
5.
Turn the controller to set the air distribution 
individually.
Airflow directed toward the windshield and 
side windows
Air to the upper body area
Air to the footwell
Temperature
Set the desired temperatures indi-
vidually for the driver's and front 
passenger's sides.
The automatic climate control 
achieves this temperature as quickly as possi-
ble regardless of the season, using maximum 
cooling or heating power if necessary, and then 
maintains it.
Avoid switching the automatic climate 
control system frequently from very low 
to very high temperatures and vice versa. When 
changes are made quickly in succession, the 
automatic climate control does not have 
enough time to achieve the set temperature.
<
Maximum cooling
At outside temperatures above 
32
7/0 6 and when the engine is 
running, you obtain a maximum 
cooling effect as soon as possible.
The automatic climate control switches to the 
lowest temperature and operates in recircu-
lated-air mode. Air flows at maximum rate only 
from the vents for the upper body area. For this 
reason you should ensure that these vent out-
lets are open before selecting this program.
AUTO program
The AUTO program adjusts the air 
distribution to the windshield and 
side windows, towards the upper 
body area and into the footwell for you. The air 
flow rate and your temperature specifications 
will be adapted to outside influences as a result 
of seasonal changes, e.g. sunlight or window 
condensation.
The cooling is switched on automatically with 
the AUTO program.
Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG