Laney Amplification Video Gaming Accessories TFX200 ユーザーズマニュアル
WARNING: To prevernt electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this
appliance, read the operating guide for further warnings.
appliance, read the operating guide for further warnings.
Caution: Risk of electrical shock - DO NOT OPEN!
Caution: To reduce the risk of electrical shock, do not remove cover. No user servicable parts inside. Refer servicing to
qualified service personnel.
Caution: To reduce the risk of electrical shock, do not remove cover. No user servicable parts inside. Refer servicing to
qualified service personnel.
Intended to alert the user to the presence of uninstalled "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the product.
the literature accompanying the product.
This apparatus must be earthed. The wires in these mains are coloured in accordance with the following code.
Green & Yellow Earth
Blue Neutral
Brown Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows: - The wire which is coloured GREEN & YELLOW must be connected to
the terminal in the plug which is marked with the letter E or by the earth symbol or coloured green or Green and yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
If a 13 amp (BS1363) plug is used a 13-amp fuse must be fitted, or if any other type of plug is used a 15 amps fuse must be
fitted either in the plug or adapter or at the distribution board.
the terminals in your plug, proceed as follows: - The wire which is coloured GREEN & YELLOW must be connected to
the terminal in the plug which is marked with the letter E or by the earth symbol or coloured green or Green and yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
If a 13 amp (BS1363) plug is used a 13-amp fuse must be fitted, or if any other type of plug is used a 15 amps fuse must be
fitted either in the plug or adapter or at the distribution board.
EMC warning
It is inherent in the design of a loudspeaker and in the design of guitar pickups that they should emit or be affected by electro
magnetic fields. Loudspeaker enclosures should not be used less than two meters away from equipment, which is likely to
be affected by electro magnetic interference.
Likewise, guitar fitted with electro magnetic pickups should not be used less than two meters away from any source of
emissions such as loudspeakers. Emissions from loudspeakers are dependent on the frequency characteristics of the drive
unit. Levels were measured direct from the driver of 30 dBuV. These levels are reduced to a safe level at a distance of 1,27
meters from the drivers.
It is inherent in the design of a loudspeaker and in the design of guitar pickups that they should emit or be affected by electro
magnetic fields. Loudspeaker enclosures should not be used less than two meters away from equipment, which is likely to
be affected by electro magnetic interference.
Likewise, guitar fitted with electro magnetic pickups should not be used less than two meters away from any source of
emissions such as loudspeakers. Emissions from loudspeakers are dependent on the frequency characteristics of the drive
unit. Levels were measured direct from the driver of 30 dBuV. These levels are reduced to a safe level at a distance of 1,27
meters from the drivers.