Laney Amplification Video Gaming Accessories TFX200 ユーザーズマニュアル

SUPPLY VOLTAGE - 115V
& FUSE RATING - 230V

- T2A
- T1A

MAXIMUM POWER CONSUMPTION

150 WATTS 50/60 Hz

WARNING THIS EQUIPMENT MUST BE EARTHED.

WARNING TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
ATTENTION REMPLACER LE FUSIBLE PAR LE
MEME ET LE CALIBRE
ATTENTION DEBRANCHER A LA PRISE
SECTEURAVANT D'OUVRIR.

CAUTION TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVERS. NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL

HEADPHONES

DRIVE - RING

LINE
OUT

A TOTAL LOAD OF NO LESS
THAN 4 OHMS CAN BE
CONNECTED AT ONE TIME

REVERB

EFFECTS LOOP

RETURN

SEND

CHANNEL - TIP

REMOTE

SERIAL No:

CAUTION
RISK OF ELECTRIC SHOCK - DO NOT OPEN

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE THE
APPLIANCE TO RAIN OR MOISTURE

CAUTION TO REDUCE THE RISK OF
FIRE HAZARD REPLACE FUSE WITH SAME TYPE
AND RATING ONLY

EXTENSION SPEAKER SOCKET: Can be used to connect an external speaker cabinet to the TF50.
The cabinet should have an impedance of no less than 4 Ohms.

HEADPHONE SOCKET: Can be used to connect an pair of stereo headphones for silent practice.

LINE OUT SOCKET: This socket is provided to supply a line level signal for an external power amplifier
or as a feed to an external recording device.

EFFECTS LOOP A SEND: This socket provides an output from the pre-amplifier for sending to an
external effects processor.

EFFECTS LOOP A RETURN: This socket is provided to accept the output of an effects processor
being driven from (31).

REVERB/EFFETS MUTE SOCKET: Provided for connecting an FS1 (not supplied) for the remote
muting of the onboard DSP effets.

REMOTE FOOTSWITCH: Socket for connecting an FS2 footswitch (not supplied) for switching
channel and gain

TFX300/TFX320/TFX700

Laney