Bryan Boilers Flexible Water Tube Boilers ユーザーズマニュアル
Special applications, custom
6
Compliance+
®
Low NO
x
Boilers
Bryan hot water and steam boilers
in DR, AB, RV and RW Series are
available as “LX” type with NO
in DR, AB, RV and RW Series are
available as “LX” type with NO
x
level of sub 30 PPM gas and
reduced oil NO
reduced oil NO
x
as standard.
Models to meet stricter emission
levels down to 9 PPM are also
available. Sizes range from 350
MBH to 21,000 MBH (8 BHP to
500 BHP).
levels down to 9 PPM are also
available. Sizes range from 350
MBH to 21,000 MBH (8 BHP to
500 BHP).
RV Series LX Type
Steam Boiler
RV500-S150-FDG-LX
(120 Boiler HP)
Steam Boiler
RV500-S150-FDG-LX
(120 Boiler HP)
Indirect Water
and Pool Heaters
and Pool Heaters
Water-Pak™ Systems
Designed to meet large volume hot water needs
with low operating and maintenance costs. Includes
indirect water heater, storage tank complete with
insulation and PVC jacket, and related pump and
circulation equipment, mounted on a common skid.
Horizontal sizes from 387 to 3,533 gallons; vertical
sizes from 335 to 1,922 gallons. Recovery rates from
559 gal/hr (80° to 140°F rise) to 6,400 gal/hr (40° to
160°F rise) depending on boiler size.
with low operating and maintenance costs. Includes
indirect water heater, storage tank complete with
insulation and PVC jacket, and related pump and
circulation equipment, mounted on a common skid.
Horizontal sizes from 387 to 3,533 gallons; vertical
sizes from 335 to 1,922 gallons. Recovery rates from
559 gal/hr (80° to 140°F rise) to 6,400 gal/hr (40° to
160°F rise) depending on boiler size.
CLM-120-WT-FDG-844-AV-CM-IN
(960 GPH w/844 gallon storage)
(960 GPH w/844 gallon storage)
The Bryan “Indirect” water heater
utilizes the “Flexible Water Tube”
boiler design along with copper and
brass heat exchangers installed to
generate hot water for commercial
service and industrial hot water
applications, as well as swimming
pool heating. The indirect feature,
heating water with water, effectively
minimizes scaling and corrosion
that normally is experienced
with the short-lived “direct
fired” water heater.
Units are available for
“tankless” or instanta-
neous applications, as
well as for “storage”
tank systems such
as the Bryan
“Water-Pak
utilizes the “Flexible Water Tube”
boiler design along with copper and
brass heat exchangers installed to
generate hot water for commercial
service and industrial hot water
applications, as well as swimming
pool heating. The indirect feature,
heating water with water, effectively
minimizes scaling and corrosion
that normally is experienced
with the short-lived “direct
fired” water heater.
Units are available for
“tankless” or instanta-
neous applications, as
well as for “storage”
tank systems such
as the Bryan
“Water-Pak
TM
.”
Indirect
Swimming Pool Heaters
Swimming Pool Heaters
Atmospheric gas and forced draft
(all fuels) and electric. The prestigious
“Indirect.” The Bryan lndirect principle
provides for a long-lived and trouble-free
heater, to give many years of reliable
and efficient operation. Fifty years of
experience in heating swimming pools.
Standard sizes range from 350 MBH
through 8,000 MBH.
(all fuels) and electric. The prestigious
“Indirect.” The Bryan lndirect principle
provides for a long-lived and trouble-free
heater, to give many years of reliable
and efficient operation. Fifty years of
experience in heating swimming pools.
Standard sizes range from 350 MBH
through 8,000 MBH.
CLM210-W-GI
(137,000 Gallons)
(137,000 Gallons)
BRYAN
®