Movincool CLASSICPLUS14 操作ガイド

1. All electrical work, if necessary, should only be performed by qualified 

electrical personnel. Repair to electrical components by non-certified 

technicians may result in personal injury and/or damage to the unit. All 

electrical components replaced must be genuine MovinCool parts, purchased 

from an authorized reseller.

2. The proper electrical outlet for MovinCool units must be equipped with a UL 

approved circuit breaker.

3. Because of potential safety hazards under a certain condition, we strongly 

recommend against the use of an extension cord.

However, if you still elect to use an extension cord, it is absolutely necessary 

that it is a UL listed, 3-wire grounding type appliance extension cord, having a 

3-blade grounding plug and a 3-slot receptacle that plugs into the appliance.

The marked rating of the extension cord should be 115 V, 15 A for Classic Plus 

14, and 230 V, 20 A for Classic Plus 26 or equivalent.

4. The Classic Plus 14 is equipped with a 10 ft (3.0 m) UL approved LCDI power 

cords. The Classic Plus 26 is equipped with a 6 ft (1.8 m) UL approved LCDI 

power cord. For replacement, fixed location (hardwire) or power cord 

lengthening (extension cord) cords are required, contact your MovinCool 

reseller or a qualified electrician for approved replacement methods.

5. Never fold or place heavy objects on the power cord.

This could result in damage to the power cord causing electrical shock or fire.

6. Do not place water or any other liquid on the unit. This can cause damage to 

the unit and increase the risk of electrical shock.

7. Do not sit or stand on the unit.