Maytag MES8880DS インストールガイド

Remove all items from inside the baking drawer, warming drawer 
or premium storage drawer, and then allow the range to cool 
completely before attempting to remove the drawer.

1. Open the drawer to its fully open position.

2. Using a flat-blade screwdriver, gently loosen the drawer from 

the glide alignment notch, and then lift up the drawer 
alignment tab from the glide.

3. Repeat Step 2 on the other side. The drawer is no longer 

attached to the drawer glides. Using both hands, pick up the 
drawer to complete the removal.

1. Align the forward drawer notches with the notches in the 

drawer glides on both sides. Place the rear alignment tabs 
into the drawer glides on both sides.

2. Push the drawer in all the way.

3. Gently open and close the drawer to ensure it is seated 

properly on the glides on both sides.

For normal range use, it is not suggested to remove the oven 
door. However, if removal is necessary, make sure the oven is off 
and cool. Then, follow these instructions. The oven door is heavy.

1. Open oven door all the way.

2. Pinch the hinge latch between two fingers and pull forward. 

Repeat on other side of oven door.

3. Close the oven door as far as it will shut.

4. Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from 
the oven door frame.

1. Insert both hanger arms into the door. Be sure that the hinge 

notches are engaged in the oven door frame.

2. Open the oven door.

The door should be able to open all the way.

3. Move the hinge levers back to the locked position. Check 

that the door is free to open and close and is level while 
closed. If it is not, repeat the removal and installation 
procedures.

A

B

C

A

B

A

A