TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P ユーザーズマニュアル

 

 

 

 
 

Reboot the Print server: 

1.  Verify the power of print server is turned on. 
2.  Press the reset button once, and then release it. 
 
WARNING: This will restart the print server and stop all on-going and pending print jobs! 

 
Perform a Factory Default: 

1.  Disconnect the external power adapter. 
2.  Hold down the reset button. 
3.  Reconnect the external power adapter. Wait about 5 seconds. 
4.  Release the reset button. 
5.  The print server will restart. 

 

WARNING: This will erase all settings of print server to default and should be performed with 
caution!

 

 

After performing a factory default, the default settings will be: 
z  DHCP client: off 
z  IP address: 192.168.0.10 
Subnet Mask: 255.255.255.0 

 

                                                                                            79