Capital MWOV302ES マニュアル

 

9

• 

When powered up and prior to pressing any buttons the clock will flash 12:00 and will increase each 
minute. 

• 

To set the oven clock press the CLOCK button on the control panel once. 

• 

The clock will blink indicating it is ready to be set and the AM or PM icon will be displayed. 

• 

Set the correct time by rotating the TEMP/TIME knob on the right side of the control panel clockwise to 
increase the time and counter clockwise to decrease the time. 

• 

Once the present time has been selected, press the START button to set the time. 

• 

A 12 hour clock display is the default but may be changed. 

• 

If a 24 hour military type clock display is desired, press and hold the CLOCK button for 6 seconds. “12 hr” 
or “24 hr” will be displayed and can be toggled by pressing the TIME/TEMP knob. Press START to select 
the desired display type. 

• 

Note: AM or PM will only be displayed during the setting of the clock. 

• 

Temperature is displayed in Fahrenheit as a default but may be changed to Celsius if desired. 

• 

To change the temperature readout to degrees Celsius select the BROIL mode and set it to HIGH. 

• 

Start the mode and press and hold the TIME/TEMP button for 6 seconds. “F” (Fahrenheit) will be 
displayed as the current mode as a factory default. It can be toggled to “C” (Celsius) by pressing the 
TEMP/TIME knob. Press START to select the desired mode. 

• 

An audio beeper is used to indicate presses of the control, indicate alarm expiration, end of cycles, etc. 

• 

The beeper may be disabled if desired. 

• 

To disable the beeper, press and hold the DELAY COOK button for 6 seconds. “On” or “Off” will be 
displayed (On is the default). The state of the beeper can be toggled by pressing the TEMP/TIME knob. 

• 

Press START to select. 

• 

Oven lights may be turned On and Off by pressing the LIGHT button on the control panel. 

• 

In a double oven both the upper and lower oven lights will be turned On and Off when the LIGHT button is 
pressed.