Asko T884XLW オーナーマニュアル

17

Customer Care Center, 1-800-898-1879, www.askona.com

INSTALLATION

1.   Undo the screw on the back of the ASKO washing 

machine as shown in the figure.

2.  Secure the anti-tilt device using the screws as shown 

in the picture.

3.  Take the other anti-tipping bracket from the bag and 

attach it on the dryer with two screws as shown in the 

figure.

4.  Place the two rubber feet on the front feet of the dryer.

5.  Fasten or undo the rear feet of the appliance until 

it is fully level, either on the floor or on the washing 

machine.

6.  Slide the dryer backward until it reaches the anti-

tipping bracket. Make sure the front of the appliance is 

raised by 50 to 150 mm as you slide it back.

ADJUSTING THE FEET

Screw the feet in or out so that the tumble dryer is steady 

and balanced on the floor or on the washing machine.