Zephyr AK7042BS 入門ガイド

www.zephyronline.com

Charcoal Filter Change Reminder (charcoal filter, if installed)
When your hood is installed as a recirculating unit, it is fitted with a set of charcoal filters to purify exhaust 
and fumes from cooking, then re-circulates the air within the home.  These charcoal filters are required to 
be replaced after every 120 hours of use.  The charcoal filters should never be cleaned or placed in a dish 
washer.

The filter change reminder function in the microprocessor needs to be switched on.  When switched on, the 
microprocessor will elapse and count usage time and indicate by a flashing         when charcoal filter 
replacements are needed.

C

Setting the Filter Change Reminder
When off, hold        for approximately 5 seconds.       
The display will change from        (exhaust mode)  to           
        (recirculating mode)  this indicates that the 
elapse timer function is switched on and charcoal 
filters are used.

Filter Replace Indicator
When the display          starts flashing, the charcoal 
filters need to be replaced.

Re-setting Function
Once filters are replaced, with hood off, press and 
hold        the display will appear;  hold for apprimately 
5 seconds until          on displays disappears          .  
The filter change reminder is now re-set and a new 
120 hour elapse cycle is initiated.

C

C

C

C

hold 5 sec.

display from  < - > to < C >

Set Mode

Set Mode

display < C > flashes

Change FIlters

C

hold 5 sec.

display from  < C > to <    >

To Reset

C