Kraus FUS13101 インストール手順
Prior to Installation:
•
Make sure you have all necessary parts by checking the diagram and parts list. If
any part is missing or damaged, please contact Kraus Customer Service at 800-
775-0703 for a replacement
any part is missing or damaged, please contact Kraus Customer Service at 800-
775-0703 for a replacement
•
Turn off the hot and cold water supply at the angle stops and turn on the old
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone
•
Place bucket under angle stops. Turn on to flush any debris prior to installing new
plumbing. Shut off angle stops
plumbing. Shut off angle stops
•
Pre-drilled hole size requirement: 1-3/8” (min) – 1-1/2” (max)
•
Max countertop thickness: 1-3/8”
Tools you will need:
Adjustable Wrench Phillips Screwdriver
Safety Goggles
Bucket
6 5/8”
5 4/5”
3/8”
(10mm)
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
3 3/4”
(168mm)
(147.3mm)
(96mm)
∅
1 3/4”
(
∅
45mm)
∅
1 15/16”
(
∅
50mm)
9/16”-18UNEF
27mm ~ 41.3mm
1 1/16”
~ 1 5/8”
∅
1 15/16”
(
∅
50mm)
12 7/16”
(316mm)
1 5/8”
(42.5 mm Max)
7A
8B
8C
8D
8A
7A
8B
8C
8C
8D
8A