Friedrich YM18N34B インストール手順

9

Shows Setting for:

- Set Point (Temperature)
- Room Temperature 
- Clock (AM/PM)

Turns unit on/off

Cycles between
AUTO, HEAT,
COOL, or FAN 
ONLY 
(if equipped)

Sets fan to either:
- Cycle automatically
- Run continuously

Check / Clean

Automatically 
selects best fan 
cooling speed

(if equipped)

Selected fan speed

(if equipped)

Increment UP

Increment DOWN

Turns ON or OFF

:

Do not block

Let’s check out how to control your air conditioner. On the control panel, just above the POWER , is a liquid crystal display (LCD). All of the control panel function 
buttons and mode icons can be viewed in Figure 8.

Power On – Press the button to turn on the air conditioner. The power button illuminates to indicate that the power is on. The backlight on the power switch 
will automatically dim to 20% intensity after 15 seconds of inactivity. The remote control can also be used to turn power ON / OFF (See Remote Control).

Display 
inactivity, the display dims to 20% intensity. After an additional 120 seconds, the display switches off. Touching any button automatically changes the display 
to full brightness.

There are three control push buttons on each side of the display.

 Automatically switches 
 between cool & heat

FAN 

SPEED

FAN

MODE

SYSTEM

TIMER

SCHEDULE

Sets fan speed:
LOW, MED,
HIGH or AUTO
(if equipped)