Miele KWT1603SF 取り扱いマニュアル
Page 2 of 12
Side-by-Side Merging Kit
KSK 1002
KSK 1002
This merging kit should be used for
side-by-side installation of the following
models:
side-by-side installation of the following
models:
– K 18x1 SF, K 19x1 SF,
K 18x3 SF, K 19x3 SF
– F 14x1 SF, F 18x1 SF, F 19x1 SF
F 14x3 SF, F 18x3 SF, F 19x3 SF
– KF 18x1 SF, KF 19x1 SF,
KF 18x3 SF, KF 19x3 SF
– KWT 16x1 SF, KWT 16x3 SF
en
3
Side-by-side
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
. . . with partition
The minimum thickness of the partition
is
is
5
/
8
" (16 mm).
If there is a partition with a thickness
from
from
5
/
8
" (16 mm) to 6
5
/
16
" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
each appliance should be individually
installed within its own niche using the
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
en
4