Miele DGC68 仕様シート
PureLine Plumbed Combi-Steam Oven
DGC 6805 XL
DGC 6805 XL
FOREVER BETTER
DGC 6805 XL
Page 3 of 15
SPECIFICATIONS
DGC 6805 XL — Item 23680552USA
Overall Unit Width - Excluding Fascia Dimension
Overall Unit Width - Excluding Fascia Dimension
21
9
/
16
” (548mm)
Overall Height - Excluding Fascia Dimension
17
11
/
16
” (449mm)
Overall Unit Depth - Excluding Fascia Dimension
21
5
/
8
” (550mm)
Oven Door Clearance
13” (330mm)
Depth with door open
34
11
/
16
” (898mm)
Overall Fascia Dimensions
23
7
/
16
” (595mm) W x 18” (455.5mm) H
x
7
/
8
” (22mm) D
Built-In
Minimum Cabinet Width
Minimum Cabinet Width
22
1
/
16
” — 22
3
/
8
” (560 - 568mm)
Minimum Cabinet Depth
21
7
/
8
” (555mm)
Minimum Cabinet Opening Height
17
11
/
16
” — 17
13
/
16
” (450 — 452mm)
Minimum Base Support
60 lbs
Additional Cut-outs Required
Venting and plumbing cut-out required
19
19
11
/
16
” x 1
9
/
16
” (500 x 40 mm)
Plumbing
Water Supply Requirements
Connect to a cold water supply only. Must
be connected to a shut-off valve. The water
shut-off valve must be accessible after
installation. The water pressure must be
between 14.5 psi (1 bar) and may not
exceed 87.02 psi (6 bar). If the pressure is
higher than 87.02 psi (6 bar), a pressure
reducing valve must be installed. The
supplied hose has a length of 59” (1500mm).
The hose must not be shortened. The entire
hose length must not exceed 24’7” (7.5m).
be connected to a shut-off valve. The water
shut-off valve must be accessible after
installation. The water pressure must be
between 14.5 psi (1 bar) and may not
exceed 87.02 psi (6 bar). If the pressure is
higher than 87.02 psi (6 bar), a pressure
reducing valve must be installed. The
supplied hose has a length of 59” (1500mm).
The hose must not be shortened. The entire
hose length must not exceed 24’7” (7.5m).
Drainage Requirements
Drain hose loop may be positioned at or
above the flood level of the sink or drain
board to which it is connect to provide the
proper air gap. The top of end the drain hose
must not be higher than 19
above the flood level of the sink or drain
board to which it is connect to provide the
proper air gap. The top of end the drain hose
must not be higher than 19
11
/
16
” (500mm) to
where it connects to the drain trap.The drain
hose must not be shortened. The entire hose
length must not exceed 24’7” (7.5m). See
installation manual for additional
information.
hose must not be shortened. The entire hose
length must not exceed 24’7” (7.5m). See
installation manual for additional
information.
Plumbed Hose Connection
Supplied hose: flexible braided 4’11”
(1.5m) with GHT fitting for connection to a
shut off valve
(1.5m) with GHT fitting for connection to a
shut off valve
Electrical
Electrical Requirements
Electrical Requirements
240V 60Hz 20A
Power Cord
Molded plug - NEMA 6-20, 240V power cord
Cut out for power cord
Minimum 3” square
Electrical Rating
2.7kW (240V)
Total Amps
11.25A on 240V
Shipping
Shipping Weight
Shipping Weight
65 lbs
Shipping Dimensions
26
7
/
32
” (666mm) W x 21
5
/
8
”(549mm) H x
23
1
/
16
” (535mm) L
Support
Call
Call
800.843.7231
20/20
8
2020technologies.com