Electrolux EI30EF45QS オーナーマニュアル

ページ / 48
41
Removing and Replacing the 
Oven Door (con’t)
Care and Cleaning
Cooktop cleaning and 
maintenance
Cleaning recommendations 
for the ceramic glass cooktop
Consistent and proper cleaning is essential to 
maintaining your ceramic glass cooktop
Prior to using your cooktop for the fi rst time, 
apply the recommended Cleaning Creme to the 
ceramic surface. A sample of that cleaning creme 
is supplied with your cooktop and it is available in 
most hardware stores. Clean and buff with a paper 
towel. This will make cleaning easier when soiled 
from cooking. The special cooktop cleaning cream 
leaves a protective fi nish on the glass to help 
prevent scratches and abrasions.
Sliding aluminum or copper clad bottom pans on 
the cooktop can cause metal markings on the 
cooktop surface. These marks should be removed 
immediately 
after the cooktop 
has cooled using 
the cooktop 
cleaning cream. 
Metal marks 
can become 
permanent if not 
removed prior to 
future use.
Cookware (cast iron, metal, ceramic or glass) with 
rough bottoms can mark or scratch the cooktop 
surface. Do not slide anything metal or glass 
across the cooktop. Do not use your cooktop as 
a cutting board or work surface in the kitchen.  Do 
not
 cook foods directly on the cooktop surface 
without a pan. Do not drop heavy or hard objects 
on the glass cooktop, they may cause it to crack or 
break.
DO NOT use a cooktop cleaner on a hot 
cooktop. The fumes can be hazardous to 
your health, and can chemically damage the 
ceramic-glass surface.
Before cleaning the cooktop, be sure the controls 
are turned to OFF and the cooktop is COOL.
For light to moderate soil:
Apply a few drops of CookTop® Cleaning Creme 
directly to the cooktop. Use a paper towel to clean 
the entire cooktop surface. Make sure the cooktop 
is cleaned thoroughly, leaving no residue. Do not 
use the towel you use to clean the cooktop for any 
other purpose.
For heavy,  burned on soil:
First, clean the surface as described above. Then, 
if soils remain, carefully scrape soils with a metal 
razor blade scraper, holding scraper at a 30 degree 
angle to the surface. Remove loosened soils with 
cooktop cleaning cream and buff surface clean.
Roller pin
Hinge arm notch
Hinge arm hook
Slot bottom
Figure 4