Friedrich PDH12R3SG インストール手順

12

1.  Remove the center support and weatherboard if still installed in 

the sleeve.

2.  Insert six plastic grommets into the grille openings from the outside 

of the grille as shown in Figure 13.

3.  Insert two #8 x ⅜" sheet metal screws (provided) in the top two 

outside edge plastic grommets, and tighten them half way into 

the grommets.

4.  Grasp the grille by the attached plastic handles.  Position 

it with the condensate drain knockouts facing down. 

 

From inside the building, maneuver the grille through the wall 

sleeve and pull toward you until the screw heads are inserted 

into the keyhole slots at the top of the wall sleeve.  Tighten the 

two screws completely.

5.  Insert the remaining screws into the remaining holes and tighten 

securely.

Not following Installation Instructions for

mounting your air conditioner can result

in property damage, injury, or death.

FRP013

WALL SLEEVE

WEATHERBOARD

CENTER SUPPORT

STANDARD GRILLE

PLASTIC HANDLES

PLASTIC GROMMETS

WALL

SLEEVE

STANDARD

GRILLE

#8 x 3/8”

SHEET METAL

SCREW

Stamped Aluminum Grille

Plastic Grommets

#8 x ⅜" Sheet Metal Screws

1

6

6