Dacor RNR30NC 使用とお手入れ

ページ / 36
10
Operating the Oven
GlideRack Oven Racks 
Your oven comes with Dacor’s deluxe GlideRack oven 
racks. You can pull them out further than other types of 
oven racks and still support heavy pots and pans full of 
food. They are great for heavier foods and the optional 
Dacor baking stone.
To install a GlideRack oven rack:
1.  Align both sets of safety clips (right and left) on the 
back of the rack guides with the oven rack supports as 
shown below. NOTE: The diagram below shows instal-
lation with the rack guides extended but, the rack 
may be installed with or without the guides extended, 
whichever is easier.
2.  Begin to slide the rack in, lifting the front safety clips 
over the front of the oven rack supports.
3.  Push the rack all the way in.
4.  Grasp the rack in the center of the front and pull. The 
rack should come forward while the guides remain in 
place.
To remove a GlideRack oven rack:
•  Grasp the rack with both hands and pull it gently 
straight out toward you until it stops.
•  Lift up until the front safety clips just clear the front 
of the rack supports on the oven. Continue to pull out. 
Moving the end of the rack back and forth slightly, left 
to right, as you pull, will make it easier to remove.
Racks
You may use either rack type on any level inside the oven.
 WARNING
To reduce the chance of burns, position the oven 
racks when the oven is cool. If you must reposition a 
rack when the oven is hot, do not allow potholders to 
contact the heating element inside the oven.
Standard Racks
To insert a standard oven rack:
1.  Insert the end of the rack with the safety notches into 
the oven first.
2.  Attach both sides of the rack to the rack supports in 
the oven as shown in the diagram below.
3.  Begin to slide the rack in, and then, lift up so that the 
safety notches clear the ends of the rack supports.
4.  Push the rack all the way in with both hands. 
To remove a standard oven rack:
•  Grasp it with both hands and pull gently straight out 
toward you until it stops.
•  To remove the rack completely, lift the front of the 
rack up about six inches and continue to pull it out. 
Lifting the rack releases the safety notches. The 
safety notches reduce the chances of a rack coming 
out of the oven accidentally.
GlideRack Oven Rack Installation
Standard Rack
Front of 
rack
Lift front safety clips 
over rack supports
Rack 
support
Slide oven rack 
supports between 
back safety clips
Back of 
guide
Rack guides
Front of rack
Safety notch
Rack 
support
Slide oven rack 
supports into slots 
on the rack
Back of rack