Intel AUGSBURG S775 I915G MATX 10PK KD915GAGLKPAK10 ユーザーズマニュアル
製品コード
KD915GAGLKPAK10
Product Description
1.13.2.7 Wake from PS/2 Devices
PS/2 device activity wakes the computer from an ACPI S1 or S3 state.
1.13.2.8 PME# Signal Wake-up Support
When the PME# signal on the PCI Conventional bus is asserted, the computer wakes from an ACPI
S1, S3, S4, or S5 state (with Wake on PME enabled in BIOS).
S1, S3, S4, or S5 state (with Wake on PME enabled in BIOS).
1.13.2.9 WAKE# Signal Wake-up Support
When the WAKE# signal on the PCI Express bus is asserted, the computer wakes from an ACPI
S1, S3, S4, or S5 state.
S1, S3, S4, or S5 state.
1.13.2.10 +5 V Standby Power Indicator LED
The +5 V standby power indicator LED shows that power is still present even when the computer
appears to be off. Figure 15 shows the location of the standby power indicator LED in the
D915GAV board. The LED is in the same location on the D915GAG board.
appears to be off. Figure 15 shows the location of the standby power indicator LED in the
D915GAV board. The LED is in the same location on the D915GAG board.
CAUTION
If AC power has been switched off and the standby power indicator is still lit, disconnect the power
cord before installing or removing any devices connected to the board. Failure to do so could
damage the board and any attached devices.
cord before installing or removing any devices connected to the board. Failure to do so could
damage the board and any attached devices.
OM16668
CR3J1
Figure 15. Location of the Standby Power Indicator LED
45