Zephyr COKE36BRGX マニュアル

3.  Install threaded cable lock and remote blower 

wiring harness through the remote blower 
wiring knockout. Attach by (4) M4*8 screws. 

5.  Connect 6 pin male connector from remote 

blower wiring to 6 pin female connector on 
control board box.

1.  Remove internal blower fl ange plate. 

2.  Install remote blower 8” round collar. Attach by 

(4) M4*8 screws.

NOTE: For instructions on mounting the remote 
blower please refer to the CBE-1000 or PBN-
1000A remote blower manual included in the 
remote blower packaging or on our website at
www.zephyronline.com

4.  Secure ground wire from remote blower wiring 

to ground wire rivet nut.