Bosch HBLP751UC インストール手順

English 3

Cabinet requirements vary depending on the model to be 
installed. Please consult the “Cabinet Dimension 
Requirements” section at the back of this installation 
manual for the details pertaining to your particular model.

•

1/4” (6.4 mm) space between the side of the oven and  
an adjacent wall or cabinet door when installed at the 
end of a cabinet run.

•

Installation of 2x4’s extending front to back flush with 
the bottom and side of the opening to provide oven 

support. This supporting base must be well secured to 
the floor/cabinet and must be level.

•

The electrical conduit box must be located above the 
unit to facilitate connecting and servicing the unit.

•

The cabinet base must be flat and capable of 
supporting the weight of your oven when in use (varies 
by model up to 429 lbs. (195 kg)). See the appropriate 
weight for your model in the “Cabinet Dimensions 
Requirements” section at the back of this installation 
manual.

•

Cut straps on outside of box.

•

Remove cardboard box.

•

Remove all top and side cardboard and Styrofoam 
braces.

•

Place oven in front of cabinets where it is to be 
installed.

•

Unscrew unit from Left and Right Brackets as show in 
“Left and Right Packaging Bracket Removal.”

Note:
Different models use different packaging materials.  Actual 
brackets may look differently. Bracket remains in packaging 
base. Unit should stay on packaging base until ready to be 
lifted into cabinet cutout.

Place oven in front of cabinets where it is to be installed. 
Rest it on a sturdy support so that it is in line with the 
cabinet cutout.