Electrolux EIMGD55QT インストール手順

L) Reattaching Door Assembly

 

1  Open the hinge to a 90 degree angle.

 

2  Install the door onto the hinge locating pins. 

 

3  Secure the door with 4 long, course-thread, 

counter-sunk screws.

 

4  Close the door and test the operation of the 

latch.

 

3  Rotate and move trim ring cover plate to 

opposite opening in trim and reinsert.

M) Reversing Trim Ring

 

1  Trim ring orientation is marked on the back.

 

2  Remove trim ring cover plate. To remove 

plate from left, pivot point is down. To 
remove plate from right, pivot point is up.

N) Reinstalling Trim Ring

 1 Close 

door.

 

2  Orient trim so UP position is approximately 

¾” to the left of top center. Opening in ring 
should be on the hinge side. 

 

3  Insert trim ring in slots and rotate clockwise 

approximately ¾”. 

O) Reinstalling Trim Plug

 

1  Open door to 90 degree angle.

 

2  Install trim plug with 1 long, course-thread, 

panhead screw. 

P) Plug in dryer and continue operation.